Best Shower Wall Material for Northwest Indiana Homes ...

Lori K Bath: Bathroom Remodeling Valparaiso IN

What Is the Best Shower Wall Material for Northwest Indiana Homes?

Modern walk-in shower featuring low-maintenance wall panels and a glass shower door

Shower Wall Materials That Can Handle Hard Water, Moisture, and Everyday Cleaning

For a large number of homeowners in Northwest Indiana, shower wall systems made from nonporous acrylic or solid surface material, using either little or no grout, are among the most practical options when carrying out a shower renovation or remodel. The system is constructed in a way that resists water absorption, which can make everyday cleaning easier compared to standard tiles and setups. This makes it very advantageous for homeowners where water can lead to the formation of mineral deposits and mildew (Hydrogeology of Indiana).

Quick Answer

If you are looking at the different materials for shower walls in Valparaiso, Crown Point, St. John, Schererville, Chesterton, or elsewhere in Northwest Indiana, it is very important to take into account these factors: 

  • For homeowners who want easy cleaning, fewer seams, and less need to maintain the grout, acrylic or nonporous wall panels are a practical choice. 
  • There’s also the option of using solid-surface panels, as this provides a more substantial and custom look and feel that requires little maintenance. 
  • Porcelain or ceramic tile can give you many design options regarding finish, shape, and size. However, the grout lines need regular cleaning, sealing, and upkeep. 
  • Natural stone can give off a luxurious look, but in some cases the stone needs to be sealed and will require more careful maintenance. 
  • Fiberglass can be a cheap and simple material to clean, however the range of designs and sizes may be more restricted than with more recent custom wall systems. Typically, standard sized showers are the options readily available whereas other options can provide a custom fit in your selected shower area.
  • The choice of material is just as important as the surface itself, due to the functionality of the entire installed system. Even if a wall is water-resistant it still requires a well-built shower system, the right waterproofing, and good water management are crucial. The elements between each piece of material, and how waterproof the joining material is,  are 2 big components to the longevity of the system itself.

For many homeowners who regard less scrubbing and easier long-term maintenance as their top concern, a nonporous wall system with few or no grout lines is something worth considering. 

How We Determined This Answer

The choice of material for the shower wall is influenced by factors other than its appearance; specifically, we took into account the conditions that a shower has to endure each day, such as repeated exposure to water, soap and shampoo, humidity, cleaning products, and the mineral content of the home’s water. 

The Indiana Department of Natural Resources states that the hardness of the groundwater in the state can be considerable, the hardness usually falling within the hard to very hard category. Since it is hard water, it may decrease the efficiency of soaps and lead to the formation of soap scum and mineral deposits (Hydrogeology of Indiana). 

It doesn’t follow that all the houses in Northwest Indiana have the same water. For instance, the water-quality report published by Crown Point showed a hardness level of 156 ppm as a result of its 2022 testing, which shows that homeowners should look into the actual water supply in their area rather than suppose that all communities have identical conditions (Water Quality Report).

We also looked into the EPA’s recommendations concerning bathroom renovations. The EPA advises that moisture should be controlled and that materials suitable for areas which become wet repeatedly should be used (EPA Remodeling Your Home and Indoor Air Quality). Lori K Bath also provides Northwest Indiana homeowners with low-maintenance shower systems, such as nonporous wall systems which are designed to reduce the need for grout and make cleaning easier. 

Dive In Deeper to Answer: Which Shower Wall Material Is Right for Your Home?

Nonporous Acrylic and Solid-Surface Wall Panels

For anyone who wishes to spend less time cleaning their shower, a nonporous wall system is something that is worth considering. 

Traditional tile showers consist of a number of separate pieces, which means that there are grout joints in the shower. Although the tiles themselves are not too difficult to clean, the grout does provide an extra surface which homeowners need to look after. 

Modern acrylic and all other nonporous wall systems are capable of greatly reducing the number of seams and even getting rid of traditional grout lines completely. For instance, Lori K Bath’s shower systems make use of nonporous surfaces and are fitted without having any grout lines. The company states that its systems are designed to resist the growth of mold and mildew and that they also make regular cleaning easier (Lori K Bath – Shower Systems).

For homeowners carrying out a remodelling project, this might be especially attractive since they are fed up with cleaning an old shower.

The downside is that if you want the precise appearance and degree of customization that individual tiles provide, a panel system might not offer the same installation options. Yet modern wall panels are able to mimic the look of tiles and stone without the need for traditional grout in the shower. 

As part of its range of shower options, Lori K Bath provides custom wall panels with a tile appearance, many homeowners have suggested that it’s hard to tell the difference between the two (Lori K Bath – Walk In Shower Installation in Dyer, Indiana).

Ceramic and Porcelain Tile

While tile remains one of the most popular shower wall choices, it does have its drawbacks. Homeowners are drawn towards porcelain and ceramic tiles due to the unlimited possibilities in terms of colors, patterns, sizes, and textures.

The consideration is maintenance. 

A tile shower has grout joints, and those joints require attention over time. Soap residue and dirt can become more noticeable in grout, particularly in a frequently used shower. Grout joints should be resealed every 6 to 12 months depending on use frequency to help protect from water damage behind tiles. 

That does not make tile a bad material. It simply means homeowners should understand the maintenance involved before choosing it. Ultimately, the contractor or installer should educate the homeowner on the maintenance of each selected material.

You might enjoy the appearance of a traditional subway tile shower, and if you are willing to carry out regular cleaning and keep the grout in good condition, then tiling can still be a very sensible option. It’s worth noting that if you’re set on a particular tile style, Lori K Bath offers numerous solid surface surrounds that mimic similar styles!

Natural Stone

Natural stone can give a bathroom a distinctive and upscale appearance. Stones such as marble, slate, and travertine can provide textures and colors that are difficult to match exactly with man-made products, however many solid surface options are getting very indistinguishable. 

Natural stone needs careful maintenance. In some cases, it will be necessary to seal the surface and treat it more carefully fragility-wise, and certain stones may also be more sensitive to particular cleaning products or to the accumulation of minerals, like those found in hard water.

This ultimately means that natural stone is more appropriate for homeowners who value its look and are willing to follow the maintenance instructions specific to the material.

Before choosing a natural stone shower, ask your contractor/ installer: 

  • Does the stone material need to be sealed?
  • How often must the stone need to be resealed, and with what products?
  • Which cleaners are safe? Are these special order cleaners, or everyday products?
  • What method can I use to safely eliminate the hard-water deposits?
  • How long of a time investment should I expect following the installation for regular maintenance? 

The answers can be just as significant as the color of the stone. 

Fiberglass and Other Traditional Shower Surrounds

Fiberglass surrounds have been used in bathrooms for many years since they are fairly simple and usually easy to clean. 

For homeowners looking for a simple and cheap shower surround, these materials do make sense. The problem is that they offer fewer design choices than more recent acrylic and solid-surface systems. 

When you are having your old bathroom renovated, you should also think about how the new surround will match the rest of the room. A material that deals with the problem of maintenance but has a rather outdated appearance might not give you the overall result that you desire. 

The goal is not simply to find a wall that can get wet. It is to choose a surface that works with your bathroom, your cleaning routine, and how long you expect to stay in the home.

How This Answer May Change Based on Location or Location Considerations

The environment in Northwest Indiana is not uniform, so homeowners in places such as Valparaiso, Crown Point, St. John, Chesterton, Portage, and others may have different water supplies, varying ages of their homes, different layout arrangements, and differing existing bathroom conditions. 

When comparing shower surfaces, water hardness is a particularly significant factor; according to the Indiana Department of Natural Resources, groundwater hardness is a common problem in the state, although the various community water reports show different measured values. 

If there is a noticeable amount of mineral deposit on the faucets, shower doors, or other fixtures in your home, then selecting a shower surface that is easy to wipe down may turn into a more important consideration. 

Properties situated close to Lake Michigan also have their own considerations regarding moisture. For instance, the residents of Chesterton and other areas adjacent to the lake might notice changes in humidity throughout the year. However, no matter where you are, the EPA stresses that bathroom moisture must be properly managed by means of ventilation and water control (EPA – Remodeling Your Home and Indoor Air Quality).

That is the reason why the shower wall should not be assessed on its own since proper installation, waterproofing, drainage, and bathroom ventilation all play an important role in protecting the space. 

How This Answer May Change Based on the Type of Bathroom Project

The best material to use for a wall will also vary depending on the sort of remodeling you are doing. 

When carrying out a simple conversion from a tub to a shower, one of your main concerns should be reducing the amount of maintenance required. Moreover, a wall system that requires little maintenance will let you change the look of the shower without having to rebuild it around hundreds of individual tiles.  

A bathroom remodel allows you the opportunity  to coordinate the shower walls with the flooring, the vanity, the lighting and the other finishes. If the overall design calls for it, then stone or tile may be worth considering alongside solid surface materials.

Planning to age in place, a homeowner has to consider the choice of wall material only one part of the decision; just as important may be the entry height, the seating, the grab bars, the handheld showerheads, the storage, and the overall layout of the shower. 

Lori K Bath provides features such as low-threshold showers, seating, grab bars, shelving, and other elements that can be included in a shower design (Lori K Bath – Shower System).

If the bathroom that you currently have shows signs of moisture damage, has mold, or presents problems behind the walls, then the renovation could go beyond simply replacing the part of the shower that is visible. 

Frequently Asked Questions About the Best Shower Wall Material for Northwest Indiana Homes

What is the easiest shower wall material to clean?

Wall systems that are nonporous and have either few or no grout lines are usually designed so that ordinary cleaning can be more easily carried out since there are fewer joints where soap scum and build-up can accumulate. 

Is acrylic good for shower walls?

Right, acrylic is often used for shower walls since it is water-resistant, fairly easy to clean, and comes in a wide range of colors and patterns. The quality and the way the particular system is constructed are still important. 

Is tile or acrylic better for a shower?

It all comes down to what the homeowner values. While tile offers a great deal of design flexibility, it does require maintenance of the grout. Using acrylic or other nonporous wall systems, on the other hand, can reduce the need for maintenance and eliminate most of the grout joints. 

Does hard water damage shower walls?

Hard water can contribute to soap scum and mineral deposits. Indiana groundwater commonly has significant hardness, although the actual level varies by location and water source (Hydrogeology of Indiana).

What shower wall material is best for hard water?

A surface that is both nonporous and easy to wipe clean is a practical option for a house where there is obvious hard-water buildup. While the surface on its own won’t stop deposits from forming, fewer seams together with easy-to-clean finishes can make regular maintenance easier. 

Do tile shower walls need to be sealed?

It all comes down to the type of tiles and grout that have been used; some kinds of material need to be sealed but others do not. The grout joints around the tile do need to be resealed every 6 to 12 months. People who own homes should adhere to the maintenance recommendations given by the manufacturer for the particular installation. 

Are shower wall panels better than tile?

“Better” entirely depends on what you value as a homeowner. Shower panels can eliminate grout maintenance and simplify cleaning with mild detergents, while tile offers more traditional design flexibility and a large variety of colors, sizes, and patterns while requiring scrubbing.

Can shower wall panels look like tile?

Certainly. Shower wall panels nowadays come in both tile-like and stone-like designs, and Lori K Bath provides custom wall panel options that replicate both styles, which give the appearance of tiled surfaces without having the usual grout lines in the shower (Lori K Bath – Walk in Shower Installation in Dyer, Indiana).

Does bathroom ventilation matter if I install waterproof shower walls? 

Of course, even though the walls of the shower are waterproof or water-resistant, humidity still has to be controlled. According to the EPA, the bathroom exhaust ventilation must work properly in order to remove moisture outside (EPA – Remodeling Your Home and Indoor Air Quality).

What should I look for when choosing shower wall material?

Consider the water resistance, the number of seams, the cleaning requirements, durability, appearance, the method of installation, the warranty, and the maintenance that will be needed over time. You should also take into account the present condition of the existing walls and whether or not any moisture problems have to be dealt with first. 

Key Takeaways / Final Thoughts

For countless homeowners in Northwest Indiana, a shower wall constructed from nonporous acrylic or solid surface and with either little or no grout is a reasonable choice when the principal concern is low maintenance because it makes daily cleaning easier and at the same time reduces the number of grout joints that need to be looked after. 

By no means does this mean that tiled or natural stone should be excluded; in fact they can be good choices for those who want certain colors, patterns, textures, or the appearance of traditional custom-tile. 

What matters is for you to go beyond looking at the sample in the showroom. You should consider the water in your house, the amount of cleaning you intend to do, the length of time you plan on staying in the house, how the shower will be used, and the kind of maintenance you are comfortable with. 

For residents of Valparaiso, Crown Point, Schererville, St. John, Merrillville, Hobart, Portage, Chesterton, and the other Northwest Indiana areas, the appropriate shower wall material should be one that is suitable for the bathroom that you actually use every day. 

Ready to Explore Bathroom Design Options for Your Home?

If you’re unsure about which material to choose for the shower wall in your bathroom, Lori K Bath will provide you with a free design consultation to help you consider the various options in relation to your real space. 

While having the consultation, the team will be able to look at your present tub or shower, take the measurements, examine the plumbing layout, assess the available wall space, consider the materials, colors, safety features, and your design preferences. Lori K Bath also gives out material samples and produces a 3D model so that homeowners can see how their choices will come together before the installation is carried out (Lori K Bath – Free Design Consultation).

What Can I Expect from My Free Design Consultation?

The consultation begins with a discussion of the changes you want to make and those aspects of your present bathroom that are not working. The designer can then assess the current space and go over various options including shower wall systems, tub-to-shower conversions, walk-in showers, shelving, seating, and safety features. 

Lori K Bath states that consultations are free and on no obligation, and afterwards homeowners are given an exact price for the project once their choices have been made (Lori K Bath – Free Design Consultation).

Do You Offer Financing?

Certainly. Lori K Bath provides financing to eligible homeowners. The terms and payment plans available may differ, so the exact options should be looked at during the consultation. 

Sources

Indiana Department of Nature

Hydrogeology of Indiana

Indiana Department of Natural Resources — Hydrogeology of Indiana

Crown Point Water Quality

Crown Point Water Quality Report

U.S. Environmental Protection Agency (EPA)

Remodeling Your Home and Indoor Air Quality

U.S. EPA — Remodeling Your Home and Indoor Air Quality

U.S. Environmental Protection Agency (EPA)

Biological Contaminants and Indoor Air Quality

U.S. EPA — Biological Contaminants and Indoor Air Quality

U.S. Environmental Protection Agency (EPA)

Moisture Control Guidance for Building Design, Construction and Maintenance

U.S. EPA — Moisture Control Guidance for Building Design, Construction and Maintenance

Lori K Bath

Shower Systems 

Lori K Bath — Shower Systems

Lori K Bath

Walk in Shower Installation in Dyer, Indiana  

Lori K Bath — Walk-In Shower Installation in Dyer, Indiana

Lori K Bath

Bathroom Remodeling Company

Lori K Bath — Bathroom Remodeling Company